Nuk FC+ Glass Baby Bottle 0-6M with Latex Teat 240ml

Instructions for Use:

1. Before first use, disassemble all parts of the bottle (bottle, teat, screw ring, sealing disk, and cap).
2. Wash all parts thoroughly in warm, soapy water. Rinse well and sterilize according to the sterilization instructions below.
3. Prepare the formula or breast milk according to the manufacturer's instructions.
4. Fill the bottle with the desired amount of liquid, taking care not to overfill.
5. Place the sealing disk over the bottle opening.
6. Screw the screw ring onto the bottle, ensuring it is securely tightened, but not over-tightened.
7. Attach the teat to the screw ring.
8. Check the temperature of the liquid before feeding.
9. After feeding, disassemble and clean all parts thoroughly.

Sterilization Instructions:

Sterilize all parts before each use. This can be done by boiling in water for 5 minutes, using a steam sterilizer, or a cold water sterilization solution following the solution manufacturer’s instructions. Ensure all parts are completely submerged during sterilization.

Recommended Frequency:

This bottle can be used for every feed, as needed, from birth to 6 months.

Additional Tips:

Always inspect the teat before each use and replace it at the first sign of wear or damage.
Never warm the bottle in a microwave oven, as this can create hot spots and burn the baby.
Allow the bottle to cool down after sterilization before filling with liquid.
To prevent colic, ensure the vent hole in the teat is positioned upwards during feeding.
Discard any leftover formula or breast milk after feeding.
For optimal hygiene, replace the teat every 1-2 months, or sooner if necessary.