Horien Aqua Comfort Single Solution 2x360ml

Directions for Use:

1. Wash and dry your hands thoroughly before handling your contact lenses.

2. Remove one lens from its case.

3. Place the lens in the palm of your hand and add a few drops of Horien Aqua Comfort Single Solution.

4. Gently rub the lens with your fingertip for 20 seconds to remove debris and protein deposits (recommended). Alternatively, you can skip the rubbing step and proceed directly to rinsing.

5. Rinse the lens thoroughly with a stream of Horien Aqua Comfort Single Solution.

6. Place the cleaned lens into the clean lens case filled with fresh Horien Aqua Comfort Single Solution, ensuring the lens is fully submerged.

7. Repeat steps 2-6 for the other lens.

8. Leave lenses in the case for at least 6 hours or overnight to ensure complete disinfection.

9. Discard used solution after each use and never reuse.

10. Before inserting lenses, rinse them briefly with fresh Horien Aqua Comfort Single Solution.

Recommended Frequency:

Use Horien Aqua Comfort Single Solution daily after each removal of your contact lenses.

Additional Tips:

Always replace your lens case at least every 3 months.
Avoid touching the tip of the solution bottle to any surface to prevent contamination.
Consult your eye care professional for specific advice regarding your contact lens wear and care.
Do not use tap water to rinse your lenses or lens case.
Store the solution in a cool, dry place away from direct sunlight.
If you experience any redness, irritation, or discomfort, discontinue use and consult your eye care professional immediately.
Always follow your eye care professional's recommendations for lens care and replacement schedule.