Systane Lubricating Eye Gel Drops 10ml

Directions for Use:

1. Wash your hands thoroughly before using.

2. Twist off the cap.

3. Tilt your head back slightly and gently pull down your lower eyelid to create a small pocket.

4. Hold the bottle upside down directly over your eye.

5. Gently squeeze the bottle to instill one or two drops into the pocket created by your lower eyelid. Avoid touching the tip of the bottle to your eye, eyelashes, or any other surface to prevent contamination.

6. Slowly close your eye and blink a few times to spread the gel evenly over the surface of your eye.

7. Replace the cap tightly after use.

Recommended Frequency:

Use as needed to relieve dry eye symptoms. You may instill 1 or 2 drops in each affected eye as needed throughout the day.

Additional Tips:

1. If you experience persistent eye irritation, excessive tearing, changes in vision, or redness, consult your eye doctor.

2. If you are using other eye drops, wait at least 5 minutes between applications.

3. Store at room temperature. Do not freeze. Keep out of reach of children.

4. Discard any remaining gel after the expiration date marked on the bottle.

5. Do not use if the safety seal is broken or missing.

6. Systane Lubricating Eye Gel Drops are intended to provide temporary relief from dry eye symptoms. They are not a cure for dry eye disease.