Clabi 1 Pregnancy Test

How to use: 1. Remove the test strip from the foil pouch. 2. Discard the desiccant bag. 3. Remove the plastic sleeve covering the absorbent tip. 4. Hold the strip by the plastic-coated end with the result windows facing downwards. 5. Place the absorbent tip under your urine stream for 5 seconds, ensuring it is thoroughly saturated. Alternatively, you can collect your urine in a clean, dry container and dip the absorbent tip into the urine for 5 seconds. 6. Place the strip on a flat, dry surface with the result windows facing upwards. 7. A pink colour will appear in the control window almost immediately. This indicates the test is working. 8. Wait 4-5 minutes and read the results. 9. Interpret the results: One pink line in the circular control window indicates a negative result. Two pink lines, one in the circular control window and one in the rectangular test window, indicate a positive result.

Recommended frequency: This test can be used as soon as you suspect you may be pregnant or when your period is late. If the result is negative and you still suspect you might be pregnant, repeat the test a few days later with first morning urine, as hCG levels are typically highest at this time.

Additional tips: For the most accurate results, use first morning urine. Ensure the absorbent tip is saturated but not overflowing with urine. Read the results within the specified time frame (4-5 minutes). A faint line in the test window still indicates a positive result. If you have any concerns about the result or your pregnancy, consult your doctor or healthcare professional.